+ Ответить в теме
Страница 5 из 8 ПерваяПервая ... 34567 ... ПоследняяПоследняя
Показано с 41 по 50 из 75

Тема: Замена ГУ монохром на цвет. 4.3 - уточнение нужно

  1. #41
    Сидоман (170)
    Ceed Jd Comfort 6AT (G468)
    Ceed Jd Comfort 6AT (G468)
    В клубе с 06.10.2017
    Сообщений: 324
    16 5
    Год: 2017
    Цвет: KCS
    Адрес: Ефремов
    Цитата Сообщение от COpATHuK Посмотреть сообщение
    @Can4e3, он из Румынии, какой Глонасс?))
    И то верно)

  2. #42
    Сидовод (10)
    Ceed Jd Classic 1.4 6MT (D018)
    Ceed Jd Classic 1.4 6MT (D018)
    В клубе с 21.02.2018
    Сообщений: 67
    0 10
    Год: 2016
    Цвет: Dark Gun Metal (E5B)
    Адрес: Ploiesti, RO
    Yes, no Glonass here ...

  3. #43
    Сидовод (10)
    Ceed Jd Classic 1.4 6MT (D018)
    Ceed Jd Classic 1.4 6MT (D018)
    В клубе с 21.02.2018
    Сообщений: 67
    0 10
    Год: 2016
    Цвет: Dark Gun Metal (E5B)
    Адрес: Ploiesti, RO
    Hi ! Need advice, again ...
    What is the code for the adapter for video signal ??
    Thanks !
    Нажмите на изображение для увеличения. 

Название:	adapter video KIA.jpg 
Просмотров:	185 
Размер:	50.3 Кб 
ID:	18762

  4. #44
    Джедай (9230) Аватар для work2002
    коравто, скоро в топ стоке
    коравто, скоро в топ стоке
    В клубе с 22.02.2015
    Сообщений: 5,483
    923 155
    Год: 2014
    Цвет: Infra Red (AA1)
    Адрес: Солнечная система
    @fratello, I don't understand what you need - OEM part number for connector or what else?

    The connector numbers (housing only) are 16P025-TE-3861-F or 90980-12155 (toyota)

    The connetor number with wires and pins is 1879001566AS (mobis)
    thanks @ParboiL for numbers.

  5. #45
    Сидовод (10)
    Ceed Jd Classic 1.4 6MT (D018)
    Ceed Jd Classic 1.4 6MT (D018)
    В клубе с 21.02.2018
    Сообщений: 67
    0 10
    Год: 2016
    Цвет: Dark Gun Metal (E5B)
    Адрес: Ploiesti, RO
    THANK YOU !
    Yes, I need the connector number ... Unfortunately, I do not find it in my country; I have to improvise something ...
    Regards !

  6. #46
    Джедай (6472) Аватар для sereno
    Ceed Jd Comfort 6AT (SW)
    Ceed Jd Comfort 6AT (SW)
    В клубе с 04.05.2016
    Сообщений: 7,273
    643 26
    Год: 2014
    Цвет: Коричневый
    Адрес: Киров
    афигеть, кузмич, ты что, финский понимаешь?!?!?! ))))

  7. #47
    Сидовод (10)
    Ceed Jd Classic 1.4 6MT (D018)
    Ceed Jd Classic 1.4 6MT (D018)
    В клубе с 21.02.2018
    Сообщений: 67
    0 10
    Год: 2016
    Цвет: Dark Gun Metal (E5B)
    Адрес: Ploiesti, RO
    Hi ! I need your help ...
    I switched the players ; everything is fine, I am satisfied. I crafted the jack I needed for reverse camera. BUT ... I don't know where to connect the 12th pin. To +12 VCC provided by reverse lamp ??? (schematics here : https://www.drive2.ru/l/6737742/
    Thanks !

  8. #48
    Сидозавр (230) Аватар для Instalytor
    Ceed Jd Prestige 6AT (GDI + DCT)
    Ceed Jd Prestige 6AT (GDI + DCT)
    В клубе с 23.04.2018
    Сообщений: 175
    22 13
    Год: 2018
    Цвет: Black Pearl (1K)
    Адрес: Санкт-Петербург
    12 contact about the radio you hardly will find. The wire on which the +12 V appears can be found either near the rear light, or in a harness
    that runs along the driver's threshold. You need to connect to the found wire and the connected wire to the tape recorder.

  9. #49
    Сидовод (10)
    Ceed Jd Classic 1.4 6MT (D018)
    Ceed Jd Classic 1.4 6MT (D018)
    В клубе с 21.02.2018
    Сообщений: 67
    0 10
    Год: 2016
    Цвет: Dark Gun Metal (E5B)
    Адрес: Ploiesti, RO
    Thanks ! But I don't understand ... The wire from 12th pin of the C connector on the radio must be connected to +12V WHEN THE GEARBOX IS IN REVERSE ???
    Can I connect the wire to the +12V wire of the reverse lamp ?
    Or do I find +12V "in a harness that runs along the driver's threshold" when the car is in reverse ???

  10. #50
    Сидозавр (230) Аватар для Instalytor
    Ceed Jd Prestige 6AT (GDI + DCT)
    Ceed Jd Prestige 6AT (GDI + DCT)
    В клубе с 23.04.2018
    Сообщений: 175
    22 13
    Год: 2018
    Цвет: Black Pearl (1K)
    Адрес: Санкт-Петербург
    Цитата Сообщение от fratello Посмотреть сообщение
    The wire from 12th pin of the C connector on the radio must be connected to +12V WHEN THE GEARBOX IS IN REVERSE ???
    That's right!

    Цитата Сообщение от fratello Посмотреть сообщение
    Can I connect the wire to the +12V wire of the reverse lamp ?
    Yes, you can connect to the wire of the reversing lamp on which there is +12 V.

    Цитата Сообщение от fratello Посмотреть сообщение
    Or do I find +12V "in a harness that runs along the driver's threshold" when the car is in reverse ???
    This is equivalent to connecting to the wire of the reversing lamp. Make it your own.

  11. Пользователь сказал cпасибо:

    fratello (14.07.2018)

+ Ответить в теме
Страница 5 из 8 ПерваяПервая ... 34567 ... ПоследняяПоследняя